hp or mod+..Help Please..Need to order implants tomarrow - JustBreastImplants.com Forums - Breast Augmentation, Breast Implants, and Plastic Surgeons

erin24 · 02-18-2007, 08:40 PM

So I am having a hard time deciding which type of implant to get. Its either

Smooth Round Silicone High Profiles:
425 cc 12.5 cm 5.0 cm
450 cc 12.8 cm 5.1 cm

Or

Smooth Round Silicone Moderate Plus:
400 cc 13.1 cm 4.0 cm
450 cc 13.6 cm 4.2 cm

I liked the 400cc rice test too. I tried 375 and felt like it was a little small and that 400 was just about right. Also my BWD is 13. I would like something that is going to give me good clevage and a natural, but on the large size looking breasts.

Phenomom · 02-18-2007, 08:48 PM

Hi Erin,

I also had to choose between Mod + and HP. In the end I allowed my surgeon to make the decision. Knowing that I wanted a full C with a natural appearance he chose HP. Unfortunately, I don't have my measurements.

HTH

Nanny66 · 02-18-2007, 09:01 PM

Erin, i knew nothing about this until only recently...my dear friend Jacquelinert on here always says to go 1cm under your BWD, have you heard that ? if that is correct and i have quoted her right that would seem that you should order the 12.5cm 425cc HP....do you agree ? I have absolutely no idea what my BWD was, i didnt find the forum til after my ba HTH

Vanessa · 02-18-2007, 09:11 PM

Quote:

Originally Posted by erin24

So I am having a hard time deciding which type of implant to get. Its either

Smooth Round Silicone High Profiles:
425 cc 12.5 cm 5.0 cm
450 cc 12.8 cm 5.1 cm

Or

Smooth Round Silicone Moderate Plus:
400 cc 13.1 cm 4.0 cm
450 cc 13.6 cm 4.2 cm

I liked the 400cc rice test too. I tried 375 and felt like it was a little small and that 400 was just about right. Also my BWD is 13. I would like something that is going to give me good clevage and a natural, but on the large size looking breasts.

If you're BWD is 13, then i've read you should go smaller than that, so i would recommend either the 425 or 450's. Since you're small anyways, that might be better to suit your size/ribcage....you probably still have good cleavage, but also some good projection!....but hey, what do i know!....LOL

Good luck girl!!!!

Caro_L · 02-18-2007, 09:48 PM

It depends on what you want. Mods will be larger and will give you fuller looking breasts but with less projection than HP.

From what I've seen, 'rice implants' look more like HP implants than Mod implants.

Ema · 02-18-2007, 10:33 PM

Just wanted to say good luck to you on your BA. I don't have any advice on the implants though, my PS left the profile type and exact CC's to his discretion during surgery, he ended up deciding perfectly for me, thank goodness!

erin24 · 02-18-2007, 10:49 PM

Quote:

Originally Posted by anne

Erin, i knew nothing about this until only recently...my dear friend Jacquelinert on here always says to go 1cm under your BWD, have you heard that ? if that is correct and i have quoted her right that would seem that you should order the 12.5cm 425cc HP....do you agree ? I have absolutely no idea what my BWD was, i didnt find the forum til after my ba HTH

Hey Anne, well my ps told me that your BWD is just a guideline. SO I am leaning more towards 425 hp or 400 mod +, but I am still unsure. I think though, that hps are a little more like my nursing boobs size wise. So that maybe what I choose.

erin24 · 02-18-2007, 10:50 PM

Quote:

Originally Posted by Vanessa

If you're BWD is 13, then i've read you should go smaller than that, so i would recommend either the 425 or 450's. Since you're small anyways, that might be better to suit your size/ribcage....you probably still have good cleavage, but also some good projection!....but hey, what do i know!....LOL

Good luck girl!!!!

Vanessa, how many ccs do you have. You are around my size.

Vanessa · 02-18-2007, 11:23 PM

Quote:

Originally Posted by erin24

Vanessa, how many ccs do you have. You are around my size.

i have 390's and wear a 32DD/34D....

they look like a nice C cup.

Nanny66 · 02-19-2007, 01:36 PM

Quote:

Originally Posted by erin24

Hey Anne, well my ps told me that your BWD is just a guideline. SO I am leaning more towards 425 hp or 400 mod +, but I am still unsure. I think though, that hps are a little more like my nursing boobs size wise. So that maybe what I choose.

Good luck whatever you choose x

02-18-2007, 08:40 PM	#1
erin24 Join Date: Sep 2006 Location: Seattle Posts: 347 Thanks: 13 Thanked 101 Times in 90 Posts	hp or mod+..Help Please..Need to order implants tomarrow So I am having a hard time deciding which type of implant to get. Its either Smooth Round Silicone High Profiles: 425 cc 12.5 cm 5.0 cm 450 cc 12.8 cm 5.1 cm Or Smooth Round Silicone Moderate Plus: 400 cc 13.1 cm 4.0 cm 450 cc 13.6 cm 4.2 cm I liked the 400cc rice test too. I tried 375 and felt like it was a little small and that 400 was just about right. Also my BWD is 13. I would like something that is going to give me good clevage and a natural, but on the large size looking breasts. __________________ 5'2 107 lbs Pre Ba: 32B Post Ba: 32DD 450 Moderate Plus Silicone Unders

02-18-2007, 08:48 PM	#2
Phenomom Join Date: Feb 2007 Location: Dallas, TX Posts: 1,084 My Mood: Thanks: 410 Thanked 370 Times in 316 Posts	Hi Erin, I also had to choose between Mod + and HP. In the end I allowed my surgeon to make the decision. Knowing that I wanted a full C with a natural appearance he chose HP. Unfortunately, I don't have my measurements. HTH __________________ Phenomom Age 36 5'3" & 130 lbs BA 02/12/07 325CC HPs Crease Incision Pre BA: 34B Post BA: 34D Dr. Todd Pollock Dallas, TX

02-18-2007, 09:01 PM	#3
Nanny66 Nanny to Evie Join Date: Sep 2006 Location: Uk Posts: 4,987 Thanks: 887 Thanked 1,468 Times in 1,276 Posts	Erin, i knew nothing about this until only recently...my dear friend Jacquelinert on here always says to go 1cm under your BWD, have you heard that ? if that is correct and i have quoted her right that would seem that you should order the 12.5cm 425cc HP....do you agree ? I have absolutely no idea what my BWD was, i didnt find the forum til after my ba HTH __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Unders/Overs	Whitney	General Breast Augmentation Discussion	22	10-27-2008 06:02 PM
Health issues-weight of implants??	WinchesterGal	General Breast Augmentation Discussion	7	11-26-2007 06:55 AM
Implants placed low on the chest	Ina	Ask Dr. Sorokin (New Jersey)	2	10-04-2007 05:11 PM
HELP: Need articles/studies stating NO LINK btwn implants & birth defects/cancer/etc	FlatGirl21	General Breast Augmentation Discussion	7	09-01-2007 05:05 PM

02-18-2007, 09:48 PM	#5
Caro_L Join Date: Oct 2006 Location: Montreal (Canada) Posts: 50 Thanks: 9 Thanked 2 Times in 2 Posts	It depends on what you want. Mods will be larger and will give you fuller looking breasts but with less projection than HP. From what I've seen, 'rice implants' look more like HP implants than Mod implants.

02-18-2007, 10:33 PM	#6
Ema Join Date: Jan 2007 Location: Florida Posts: 173 Thanks: 32 Thanked 53 Times in 48 Posts	Just wanted to say good luck to you on your BA. I don't have any advice on the implants though, my PS left the profile type and exact CC's to his discretion during surgery, he ended up deciding perfectly for me, thank goodness!