Not much of a difference at all. Think of it this way: a shot glass is 30 cc's and the 40 cc's difference is less than 3 tablespoons (45 cc's).

Published on Jul 11, 2012

No

Published on Jul 11, 2012

Sure, there wil be a difference, but overall it will be minimal.

Published on Jul 11, 2012

The difference between 560 and 600 cc's is very small. To give you a point of reference, 5 cc's is one teaspoon. Your surgeon will be able to help you decide on which side is more appropriate for your anatomy and your goals. Good luck and be safe.

Published on Jul 11, 2012

Just a very small difference, but that also depends on your body and breast volume now, especially submammary placement.

Published on Jul 11, 2012

There is hardly any difference between those two sizes. So I would always recommend the larger of the two as most patients always wish they went bigger.

Published on Jul 11, 2012

Obviously the 600cc are slightly larger; 40cc's to be exact. The difference is minimal, but there is some difference.

Published on Jul 11, 2012

The appearance difference would likely be subtle to the untrained eye.

Published on Jul 11, 2012

Good morning!

The difference in appearance between 560 and 600cc is pretty minimal. You would likely see slightly increased upper pole fullness with a 600 and perhaps a tiny bit more projection.

I hope this helps

Published on Jul 11, 2012

Yes, there is a 40cc difference!

Published on Jul 11, 2012

Implants of the SAME size can vary depending on the projection and "fill" percentage of the two implants. The difference between 560 and 600 cc's is only 40 cc's (less than 10 percent) but the appearance will vary more in width and projection depending on which style the patient chooses.

Published on Jul 11, 2012

Not very much.

Published on Jul 11, 2012

Not much. 40cc's is less than 3 tablespoons. This will not be very noticeable in an implant of this size.

Published on Jul 11, 2012

The answer to that question depends upon what type of breast those implants are being placed in. For example, if somebody has very little breast tissue to begin with, then that 40 mL difference can make a bigger difference. However, if that patient has adequate amount of breast tissue, then that their difference maybe more subtle. Therefore, placing two different size implants is common and can be used to improve two different breasts to improve symmetry.

Published on Jul 11, 2012

Not much of a difference at all! It usually takes about 100cc to see a difference and 200cc to make a cup size. If you are debating between 560cc and 600cc, go for the 600cc- it's hardly ever a mistake to go bigger when debating between two sizes!

Published on Jul 11, 2012